Product
GE-Nano Clear seal and GE-Nano Slurry Seal
Seals and Rejuvenators
Seals and Rejuvenators
GeoNano have developed various advanced pavement seal technologies. All of which have been specifically designed and tested. The design aspects have been based on the ‘Understanding’ of the limitations of traditional seals. These seals are ‘Multi particle’ size that penetrates deeper into the area providing a longer lasting and water-resistant surface.
All seal technology is water soluble and ‘Cold’ applied, so no special heating is required and is therefore ‘Labour Intensive’.
These Modified Seals and rejuvenators combine a series of particle sizes ranging from Nano to Micro, to create penetration as well as surface mastic.
Product name – GE-Nano ‘Clear Seal’.
A Modified ‘Clear Setting’ Emulsion that can be used on existing destressed Bituminous layers and Gravel roads for ‘Preventative Maintenance’.
Dilution: 1 Part Ge-Nano ‘Clear Seal’, 20 Parts Water
Due to the combination of particle sizes used, a water-resistant and high penetrative UV stable protective layer is achieved. The application is quick drying (+/- 1 hour) with ‘NO’ Type pick-up or contamination of vehicles and NO repainting of road markings required.
Can be easily applied with Hand Sprayers or via a Water Cart, with little training required. This sealant is also ideally suited for the priming of an exposed base, protecting the base layer against water damage and vehicle trafficking.
For a ‘Gravel Road Seal’ a double application of this seal can be applied to protect the gravel layer. It provides a surface with a ‘Natural’ Aesthetically pleasing look while protecting the layer from water damage, achieving a high depth of penetration on an existing compacted layer.
- Deep penetrating and hydrophobic wearing coarse with particle sizes from <1nm to Micrometres
- Cost Effective
- Water soluble
- Hydrophobic
- The coverage area is greatly increased due to particle size and dispersion of the liquid through increased carrier fluid
- Little to no nozzle blocking due to increased dispersion of the liquid.
- The products chemically bond to the wearing course to create superior binding.
- Easy Applied
- Labour Intensive
- Quick drying (+/- 1hr)
- No tyre pick-up
- The product is environmentally friendly
- UV stable
Product name – GE-Nano ‘Slurry Seal’.
GE-Nano ‘Slurry Seal’ is a Modified Anionic bitumen emulsion, that can be successfully placed above and below 20ᵒC, that acts as an effective aggregate adhesive which ‘permanently’ binds the bitumen to the aggregate and renders the aggregate hydrophobic and repels water from the mix.
With the improved distribution and stability of the bitumen particles, effectively reducing the percentage of binder required to achieve the same engineering properties in terms of Tensile and Compressive strength.
Can be easier applied and mixed using a concrete mixer and applied ‘labour Intensively’ by hand in one simple application using squeegees.
